Hi all.In our cisco telepresence installation we've faced an interesting issue:the cisco c40 codec admin created a custom wallpaper, somehow this wallpaper was not suitable for this codec for 100%.after he uploaded the wallpaper on the unit - it rebo...
Hello!We try to reinstall a CUCM v.8.6.2.22900-9 on one of our Cisco MCS-7825-I5servers, but everytime the server ignores booting from the dvd (bootable -TAC dispatched me with this iso, and the first installation was made usingthis DVD) and boots fr...
Hi!We have an installation withVCS 7.2, TMS 13.2.2. and a bunch of jabber video users. TMSPE is using for provisioning and etc, TMS and VCS are configured to import users from AD:VCS in in AD domain, AD srvices is configured, Default Zone is configur...
Hello!We a have an intallation of VCS 7.2, TMS 13.2.1, QuickSet C20, EX90, EX60, bunch of Jabber Video clients (5).VCS and TMS are working in legacy mode, video endpoint are registered on vcs, provisioned by TMS, software clients receive provisioning...
Hi all!I have a question about UCL licensing: we buy two ATA187 for our CUCM 8.0.3 installations,what type of license do we require?According to ordering guides i will need 4ANLG-DEV-ADD.Am i correct?
Hi there!Thanks all for your support!I've managed to recover the codec doing the following1. Connect the unit via RS-232 console port2. Right after the unit boots pressed b the c to enter the u-boot3. Then i executed the following commands setenv oth...
as i've mentioned earlier - dvd is bootable, first installation was made using this DVD, also i've tested it trying to boot on my laptop. it is not a dvd-disk problem, also i very doubt that somehow bootable sectors on the dvd could be broken :-), in...
Hi, sure, i've used bios, set boot from DVD after f12 menu (hoose bootable device) - after that the display shows a 3,5 floppy disk and instruct to press F1. After pressing F1 - nothing happens. In BOIS configuratin menu option boot from DVD is set.
Hi, thank you very much for your answer.I've forgotten that by default vcs performs sync with phonebook every 12 hours.Seems like everything is ok now - i can search for users in movi. I'll test a bit longer and let you know about the results the pro...
SIP profile type is already configured as Cisco. BTW as i wrote earlier - i can see Display Name of the endpoints. i don't see Display Name of the Jabber Video Users when the call is alerting.
