Hi,
I am currently in the process of migrating CTS systems from one CUCM to another and in the process enabling OBTP.
The CTS codec and phone register correctly, and the phone is subscribed to the correct services, but I only get the 3 softkeys on th...
Hi,I have a problem with my CTS1300.After a reboot, it can take up to 30 minutes to load the phone services / Midlets.Sometimes it won’t load the services / midlets until I press the services button which seems to kick it into action, but even then i...
Hi,I have a problem where presence is not working between users registered on the VCSc and the VCSe.If a users registers on the VCSe, they can only see the presence of the VCSe registered users, and likewise, users registered on the VCSc can only see...
Hi,I have an EX90 I am trying to provision.I can successfully provision it when it is on the customers network and can make calls to it and it’s getting the correct phonebooks, but I am unable to provision remotely.Jabber users provision correctly in...
Nalaka Karunaratne wrote: Found the answer. I'm using DX-650 and 9971 Phones and seems like they are not supported. Added a test profile with the different phone model and I can see that. Anyone know if this is in the Road map?Hi.I'm trying to get th...
Hi,Thanks for your reply.This has alwas happened since install. Its been on various loads of software.I haven't downgraded, but I have upgraded the phone load and midlets and the problem still persists.Rob
Hi,Many thanks. I had the SIP SIMPLE Presence Server set to yes on the express. Set it to no and presence works from where ever you are registered.Thanks againRob
To get this working we have had to set both the sip server and the public sip server to the VCS expressway.We also have an issue that when these EX90s are provisioned, they always register as an internal registration. The Ex90 does believe it should ...
The provisioning seems to be working, ie the template details are being pushed to the endpoint, but there is no register event from the endpoint coming to the VCS.I have syncronised the VCS from TMS.I have the correct template for the EX90, on the ri...
