As the problem persists with AnyConnect even in the case of uninstalling websecurity component and as there are no other ideas i will stay with OpenConnect that works without problems.
I have just installed 4.5.02036 , again the same problem persists. It connects with the end-point, get's an ip address, routing information, dns servers, proxy server settings etc, but only web traffic is forwarded over the tunnel interface. Any atte...
Change clocking on one side to line (default), check scrambling settings on both ends, maybe you need to disable scrambling on ASR 9006 controller (different defaults) and check for CRC settings (ASR 903 is using crc 16 while ASR 9006 uses crc 32). I...
After some testing using qemu and tap/sockets interfaces i was able to connect two instances of IOS-XRv with Dynamips instances, Junos Olive instances and my host laptop adapters. Basic routing protocols (IGP and BGP) and MPLS seem to work without is...
