About gordonderick

gordonderick · 08-16-2013

I have the above setup. ASA is is Active/Standby mode. From the NMS box i am able to ping the managment interface of the primary ASA 10.52.190.1 but from the NMS i am not able to ping the standby ASA's IP 10.52.190.2. From the primary i can ping the ...

gordonderick · 05-13-2013

Can anyone tell me the difference between 'ip vrf receive' and 'ip vrf forwarding', do these 2 commands put the interfaces in the VRF?I have a interface on the core configured with 'ip vrf recieve' (config below). Wheneve the edge device is disconne...

gordonderick · 05-10-2013

Hello,I have come across a strange issue in my network. -Firstly i am trying to understand the difference between ip vrf receive and ip vrf forwarding.-Secondly, i have an interface(FastEthernet1/0.101) in the right vrf forwarding table but i don’t s...

gordonderick · 04-25-2013

Hi,i have a set of 4 proxy servers that are already load balanced. But they are using a incorrectly configured health probe on the ace. I need to know a good configuration for a heath probe that will send a http request over port 80 , wait for respon...

gordonderick · 04-09-2013

The switch will allow only one user to connect to it at any given time. Below are the configs and oputputs.ol-dr-6509-01#show users Line User Host(s) Idle Location* 1 vty 0 gkeo idle ...

gordonderick · 09-23-2013

Thanks for the respnse.Yes the MAC is 001d.a2af.380b.The last response you are refering to is the response from the switch 10.52.190.4 and not the ASA which is .2.The first 3 are the echo requests destined for the ASA.

gordonderick · 09-20-2013

Hi,Thanks for replying. I clicked on Correct answer by mistake.See below:cc-nd4-asa5550# sh cap test detail 7 packets captured 1: 11:40:19.700021 001d.a2af.381f 001d.a2af.380b 0x0800 98: 172.18.25.65 > 10.52.190.2: icmp: echo request (DF) (ttl 62, ...

gordonderick · 08-29-2013

Hi julomban , can you think of anything that might help me?

gordonderick · 08-19-2013

Here you go:cc-nd4-asa5550# sh capture test12 packets captured 1: 09:45:48.520786 172.18.25.65 > 10.52.190.2: icmp: echo request 2: 09:45:49.520770 172.18.25.65 > 10.52.190.2: icmp: echo request 3: 09:45:50.520877 172.18.25.65 > 10.52.190.2: ic...

gordonderick · 08-19-2013

Hi, Thanks for the response. I did try your suggestion but its the same outcome as mentioned in my issue.

Member Since	‎04-09-2007 12:43 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	30
Total Helpful Votes Received	5

User Statistics

User Activity

Reachablity from outside to Standby ASA

VRF forward / receive, which one is best?

VRF receive and VRF forwarding

ACE to load balance proxy servers

Only one user can log into a switch via Telnet

Reachablity from outside to Standby ASA

Reachablity from outside to Standby ASA

Reachablity from outside to Standby ASA

Reachablity from outside to Standby ASA

Reachablity from outside to Standby ASA