Hi. I have a SCE 8000 and each time I connect the optical bypass control cable to SCE to get traffic cross it. 2-5 min later the SCE go to recover mode.I open a TAC request and send me a new SCM but the issue ocurred again.
Hi I create a package in SCABB with CIR=0, PIR=3500 kbps to have bandwith control over a range of IP address in a csv file directly applied on SCE. but when i review SCA reporter Bandwith service per package, I see 4000Kbps and more in this package...
hi i have a HAT over a private listener with RELAY mail flow policy and my clients with microsoft outlook can RELAY messages without problems. New SMTP ICID 64494 interface Data 2 (XXXXXX) address XXXXXXX reverse dns host XXXXXXX verified noThu Aug 1...
the issue was resolve. the problem is bug CSCuc76451.apply the following workaround for this software defect:Disable the HBC by executing the following CLI:SCE8000#>configureSCE8000(config)#>interface LineCard 0SCE8000(config if)#>tunable GT_PL_MODUL...
The Mail Flow Policy is set to default (off) in SMTP Authentication and the listener has "none" in SMTP Auth profileThe picture show the error in the client
Hi. the problem was solved changing MOH from MULTICAST to UNICAST, but sometimes the transfer fail. I think that MOH resources is exhausted. How I can monitor MOH resources?
