About Philippe P

Philippe P · 01-16-2018

Hello, i tried to upgrade RSP-4G from 5.3.4 to 6.1.4 i follow instructions until activation : after install activate router crash after reset i received this message Selecting ROMMON Image... BDDR in Interleaved modePOST 1 : PASSED : code 0 : DDR2 ...

Philippe P · 03-26-2018

Hello Xander, i'm trying to deploy MSTAG on ASR 9K Pair and i need to work with our current PVST part of the l2 backbone. my problem is for one vlan, even if i put spanning-tree vlan 1294 priority 61440 on PVST switch, i received on MST switch incons...

Philippe P · 01-16-2018

Thanks a lot for your feedback Aleksandar. Just to be sure,i start ASR with good RSP, when up and running,i add the second one ( hot-plug ) in order to have standby ? and wait for sync thanks in advance

Philippe P · 01-19-2015

Thanks for your feedback Alex,yes backbone is mpls ready, and we would like to transport vlans from rep ring to some switchs attach to the core backbone by using PW. just to confirm, in case of link down on REP side all traffic will pass throught cor...

Philippe P · 01-19-2015

hello Alexander,we have this current design in our backbone ( REP / L2VPN ASR ) see design.jpg Goal is to deploy a Merge of the two infrastructure in order to exchange traffic for some vlans as below : in this configuration, do we need to implement ...

Member Since	‎02-17-2013 04:44 AM
Date Last Visited	‎10-18-2020 11:35 AM
Posts	3

User Statistics

User Activity

RSP-4G Crash upgrade 6.1.4

Re: ASR9000/XR Using MST-AG (MST Access Gateway), MST and VPLS

Re: RSP-4G Crash upgrade 6.1.4

Thanks for your feedback Alex

hello Alexander,we have this