About Wilfredo Antonio Diaz Rodriguez

Wilfredo Antonio Diaz Rodriguez · 04-21-2021

Hello! i have a perfectly working python script using Netmiko for connection to the devices and PyAts/Genie to do all the parsing, and it works beautifully, i have my organization devices inventory on an excel spreadsheet and with the script i can ...

Wilfredo Antonio Diaz Rodriguez · 12-08-2013

I have a problem with LLQ and the router letting go through itself more traffic than it should be allowed too, so my queues seem not to be applying the exact BW limitations i have configured…I think it has to be with the router generating 670Kbps apr...

Wilfredo Antonio Diaz Rodriguez · 08-22-2012

Hello,I am implementing a mGRE tunnel between 4 locations (routers):r7200 - Hub and NHS = ip 10.0.78.1r1841 - Spoke = 10.0.78.2r1841 - Spoke = 10.0.78.3r871 - Spoke = 10.0.78.4the mGRE Tunnels are configure as follows:r7200 - 10.0.78.1interface Tunne...

Wilfredo Antonio Diaz Rodriguez · 06-25-2012

Is it possible to reach an IP Inside global address from the inside network (or LAN) on a cisco router when doing NAT?The case is the following:A client who doesnt have a DMZ told me he was having issues with his web application only from his LAN, me...

Wilfredo Antonio Diaz Rodriguez · 03-30-2022

TPS in ‘TPS IPC Process’ stands for ‘Trust Point Security’. This process works very closely with SMD Session manager daemon. Together these do help service the authentication and session management routines. It's related to AAA services.

Wilfredo Antonio Diaz Rodriguez · 06-26-2012

Hi,The only interface where you shouldnt be using passive interface feature are the ones where u are talking ospf...why would you want the wifi connection to be sending ospf´s hellos? Use the passive interface feature to prevent innecesary traffic to...

Wilfredo Antonio Diaz Rodriguez · 06-26-2012

Thanks for your comments they are being taken into consideration...Regards

Wilfredo Antonio Diaz Rodriguez · 06-25-2012

I couldnt even wait till tomorrow i had to setup some virtual machines and the solution worked!!! (on gns3) worked like a charm xDi had never seen that approach, thanks a lot... i knew there was to be a way... and thanks to you i have found it, u re ...

Member Since	‎06-25-2012 03:48 PM
Date Last Visited	‎03-30-2022 03:20 PM
Posts	8

User Statistics

User Activity

Pyinstaller not working with Genie and PyAts

Traffic Shaping and LLQ... weird behavior (is it normal?)

mGRE and NHRP code 4 (administratively prohibited)

Reaching an IP inside global from the inside network

Re: Cisco 3650 High CPU utilization by TPS IPC Process

Ospf Passive interface - design question

Reaching an IP inside global from the inside network

Re: Reaching an IP inside global from the inside network