About ammahend

ammahend · 04-18-2024

Wired guests are not able to get out to internet, they can ping only at when payload is set to 1300 bytes or lower, this seems like an MTU issue, but its only effecting wired guest not wireless guest. Setup is a 9800 foreign on 17.9.5 code and 5520 a...

ammahend · 02-17-2024

Hi members, I am seeing following issues on ISE after upgrading to 3.2 patch 4 : sometimes the guest page won't load with "error loading page" message, sometimes it will works great.Lot of authentication request is going to secondary node which was n...

ammahend · 10-31-2022

We are noticing that during high authentication volume hours ise application crashes and application status goes to initialization state, after sometime maybe an hour it recovers on his own and goes back to running state. Wondering if somebody else i...

ammahend · 09-09-2022

Has anyone deployed Wi-Fi for agricultural field ? Please share your experience if you can and nudge me to right resources if Cisco has a case study, the more technical it is the better.

ammahend · 08-08-2022

Hi Community, Getting following alarm on ISE (3.1 Patch 3), which doesn't seem correct. "The required minimum of hard disk(s) total size is 300 GB; found only 0 GB on node isemnt" VM has 600 GB disk Space. High Load Average: Server=psn4(on all PSNs)...

ammahend · 04-18-2024

see figure 1 for architecture I am talking about https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-12/config-guide/b_wl_16_12_cg/wired-guest.html

ammahend · 04-13-2024

If you are already running embedded wireless controller software, are you able to ping the AP IP or access it via terminal, if yes try different browser, try incognito mode.

ammahend · 04-02-2024

your traffic will pass, your switch config will stay intact, but you will loose ability to manage ISE as Rob mentioned. Also for trustsec you don’t need premier license, advantage is sufficient.

ammahend · 02-26-2024

If they have Priv15 credential they will get into priv mode not enable mode.

ammahend · 02-26-2024

under line vty configure this and try line vty 0 4 privilege level 15

Member Since	‎02-21-2011 05:26 AM
Date Last Visited	‎04-18-2024 09:29 AM
Posts	1,292
Total Helpful Votes Received	1862

User Statistics

User Activity

Wired Guest issues in foreign-acnhor setup

ISE 3.2 slowness

Ise application initialization

Wi-Fi for agricultural field

incorrect ISE alarm

Re: Wired Guest issues in foreign-acnhor setup

Re: Cisco c9120axi-e webui problem

Re: Cisco ISE 3.2 Premier License in Evaluation Mode

Re: when i ssh in not going straight into enable mode

Re: when i ssh in not going straight into enable mode