mickyq

mickyq · 09-08-2020

Found the problem.Go into DHCP>Configuration and either add some DNS IP's or hit the use opendns but...

mickyq · 09-08-2020

out of the box setup using FDM and the client device or the management device dont get DNS.manually ...

mickyq · 02-05-2019

does anyone know if there is s a link to configuring l2l vpn with certification authorization?Im cur...

mickyq · 12-14-2018

Is it possible to have separate portals in ver 1.2?I currently have a working sponsor/guest access b...

mickyq · 10-02-2018

Should anyone have this issue try moving the icmp acl to the top of the list. that fixed it for me. ...

mickyq · 10-01-2018

I have several remote sites using ASA5505 terminating on a FPR2140 ASA. All worked fine until i move...

mickyq · 09-17-2018

FPR 2140 re-imaged as an asa has failed. on bootup i see this message: firepower-2140 FPRM: <

mickyq · 09-17-2018

Thanks Shinpei.ill give that a try and let you know.sorry for the late reply, i didnt receive an ema...

mickyq · 09-12-2018

I am trying to create a l2l vpn over an internal network. The inside interface is facing the interna...

mickyq · 08-30-2018

if its like the FPR-2140 i had to go into rommon to configure network perimeters try this link https...

mickyq · 06-26-2018

I have managed to find the problem but im not sure I understand why its happening. Outbound traffic ...

mickyq · 06-21-2018

Thanks the outbound dynamic nat with PBR seems to work ok. Im using v9.8 is there a compatibility ta...

mickyq · 06-21-2018

im not using SIP. its just internet traffic to an internal server on 443

mickyq · 06-21-2018

what trouble shooting commands are there available for PBR on ASA? ive created a pbr and its working...

mickyq · 05-23-2018

Im converting a pair of 4500X from VSS to stand alone. Ive found the relevant Cisco document to foll...

Date Registered	‎12-07-2005 12:57 PM
Date Last Visited	‎03-19-2021 12:01 AM
Total Messages Posted	170
Total Helpful Votes Received	20

Re: FPR 1010 connected client not getting DNS