About Tim Lewis

Tim Lewis · 12-01-2014

After upgrading to 8.0.6 we had lot of users having issues with accessing the Internet.Initially, we thought that it may be WCCP, so we configured manually to use proxy and people didn't had issues after that, so we thought it is WCCP. After taking b...

CDA + IRONPORT - Apple MAC domain users? · 08-16-2013

We want to use CDA for transparent user authentication. Now, all users have domain credentials and even MAC users need to login with AD credentials to MAC machines.Will CDA be able to see MAC user login to MAC PC (all MAC PSs are part of windows doma...

Tim Lewis · 07-19-2013

Subject said it all.I have ECLB configured on Catalyst 3850:udld enableudld message time 2 interface TenGigabitEthernet1/1/1switchport trunk native vlan 4094switchport trunk allowed vlan 1,1500,4094switchport mode trunkudld port aggressivechannel-gro...

Tim Lewis · 07-11-2013

Hi,I need to authenticate wireless network users from two different domainsabc.company.comcde.company.comThere is trust between domains and ISE joined abc.company.com and it can authenticate and authorize users without issues.Users from cde.company.c...

Tim Lewis · 06-25-2013

Hi, I have an issue with Apple desktop computers running 10.7 and 10.8 MacOS.The problem is that we have only 2950 switches and we are very limited with what we can do on them, so we wanted basic DOT1X user authentication and VLAN placement. Those tw...

Tim Lewis · 04-24-2018

I was able to fix the problem. You can apply this method if it is not in production since we need to whip the config. 1) Remove the problem FTD from FMC 2) Make sure it is no longer registered with FMX, form FTD run "show manager" 3) From FTD, run ...

Tim Lewis · 04-24-2018

I am having the exactly the same issue. We have FTD01 and FTD02. By my mistake, initially I configured FTD02 managed by local Firewall Device Manager. Then, I converted it to be managed by FMC. Now, FTD02 has NTP sync issue. If I use time4.google....

Tim Lewis · 07-12-2013

I have trust. I can get the user information with cde\user and user@cde.company.com, but authentication is still not working. So, I see the user, but it is still not being authenticated by the policy.Here is log:11001 Received RADIUS Access-Reques...

Tim Lewis · 01-22-2013

Hi Nilesh,I might be wrong, but there has to be the way for WSA to differentiate which users should be authenticated and which not. When you are creating identities, try adding IP address of that machine and create separate policy using that identity...

Tim Lewis · 02-27-2012

I just noticed that 7.6 is available as upgrade on my C370 Appliances... Is that safe to do go there or that is still in "early deployment" phase? I am currently running 7.5.1Thanks.

Member Since	‎09-28-2009 06:53 AM
Date Last Visited	‎10-12-2023 07:05 AM
Posts	20
Total Helpful Votes Received	5

User Statistics

User Activity

Transparent User Authentication not working after upgrade to 8.0.6

CDA + IRONPORT - Apple MAC domain users?

IPS on the stick - ECLB - UDLD doesn't disable the port during IPS reload

ISE using 2 domains with trust established

Apple wired Dot1X - on Cisco 2950 switches

Re: FPR2110 NTP Sync issue with FMC

Re: FPR2110 NTP Sync issue with FMC

ISE using 2 domains with trust established

Iron port S370 authentication issues.

Ask the Expert: Best Practices for Configuring the Email Securit