adamtodd16

adamtodd16 · 08-27-2012

Good Morning,I'd like to setup individual MOH sources for some of our Branch Locations. Is the follo...

adamtodd16 · 08-27-2012

Your adapter card would have created a new COM port. Check in Device Manager under ports to see what...

adamtodd16 · 08-27-2012

Good Morning All,I am currently working on configuring a new Point to Point connection (L3) between ...

adamtodd16 · 08-27-2012

If you are connected via a console cable, you will want to use COM1 for your connection, not Telnet....

adamtodd16 · 08-23-2012

Was the new Toll Fraud applicaiton that was causing the issue. Resolved! Thanks http://www.cisco.com...

adamtodd16 · 08-23-2012

Hi Chris,I have added - incoming called-number .Still facing the same issue.

adamtodd16 · 08-23-2012

Hi All,I am currently working on a new CME integration (my first one) and want to ensure I am on the...

adamtodd16 · 08-23-2012

Hi Mike,I just completed an IOS upgrade on the device and all vlan assignments are now working corre...

adamtodd16 · 08-23-2012

Okay - I made a poor assumption previously and have found the root of the problem. When I have:switc...

adamtodd16 · 08-22-2012

Hi Cadet - I will do some of the logging tomorrow morning when I am back in the lab. Benjamin - the ...

adamtodd16 · 08-21-2012

I can't believe I am asking this, but I must be missing something. Setting up an 1811 in a lab envir...

adamtodd16 · 07-23-2012

Currently working on my first CME Setup. Have Cisco 7940 phones to use in the lab environment.When u...

adamtodd16 · 06-01-2012

Currently running CUCM 7.1.5 on hardware DL380G5 (1 CM, 1 Presence, 1 Meeting Place). Looking at upg...

adamtodd16 · 02-01-2012

Picked up an 8 port SF302 on the fly to replace a 2960 that has failed. Attempting to config for use...

adamtodd16 · 01-11-2012

Just need the 1 SIP Trunk.

Date Registered	‎11-29-2010 06:49 AM
Date Last Visited	‎01-04-2021 12:56 PM
Total Messages Posted	199
Total Helpful Votes Received	29

Branch Office MOH Configuration