About Vinayaka Raman

Vinayaka Raman · 03-25-2017

Friends, Attached topology. Centre A has an active internet line and Centre B has active internet line Centre A will acts a primary path for pool 1, 2 and secondary path path for pool 3 Centre B will act as primary path for pool 3 and secondary path ...

Vinayaka Raman · 11-06-2016

Folks, All my internet edges are 3900, 2900 running IOS 15. M or 4300 running IOS XE 16. X I wanted to improve the BGP convergence. All WAN interfaces are ethernet. when the last mile fails, WAN interface continue to stay up and rely on BGP keepali...

Vinayaka Raman · 09-23-2016

2407:1380::/32 is the block we received for advertisement. ISP says they can only accept /48 as max length. does this mean i can advertise 2407:1380:0000:/48 to ISP A , 2407:1380:0001:/48 to ISPB and so on? Likewise i can generate 2^16 unique global ...

Vinayaka Raman · 08-27-2016

Dear Folks, Topology Attached The requirement is - Remote site should prefer HUB Site 1 Internet as primary and HUB Site 2 Internet as backup - Remote site should prefer HUB Site 2 Internet as primary and HUB Site 1 Internet as backup At presen...

Vinayaka Raman · 08-06-2016

All, Will internet service provider run MPLS on their core ?

Vinayaka Raman · 03-26-2017

AS override enabled on MPLS PEs they rewrite the 65076 AS to 18101 pls note: all 3 centers run AS 65076 , MPLS AS is 18101 and Internet AS is 4755

Vinayaka Raman · 11-07-2016

Hi , the WAN links are ethernet and it never goes down unless mux is turned OFF. Can you please help me with IOS version and license required for BFD ? I am using 15.4 M train of OS with ipbase license and bfd does not work. should i elevate the lic...

Vinayaka Raman · 09-06-2016

Just bear in mind, that if you want to set preference on remote PEs that are receiving the prefixes, are going to have to confgure some import-map to set weight or something based on some match sentence. I am thinking to use community attribute to ...

Vinayaka Raman · 08-29-2016

Friends, Any help ?

Vinayaka Raman · 08-09-2016

Hi Hector, Thanks for the opportunity. 1) When should we consider using EIGRP named mode instead of classic mode? 2) In OSPF we have 2 layer hierarchy that non-zero areas should connect to area 0 backbone directly. If this rule doesn't exist how wo...

Member Since	‎08-01-2011 10:07 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	293
Total Helpful Votes Received	14

User Statistics

User Activity

Strip the Public AS

Improve the timer of Internet edge to detect the last mile outage

IPv6 Advertisement in Internet Edge

Inject Default Route from Multiple HUB sites into L3 MPLS cloud.

MPLS L3 VPN

AS override enabled on MPLS

Hi ,

Just bear in mind, that if

Friends, Any help ?

Hi Hector,