About mmedwid

mmedwid · 07-13-2021

My current ASA/AnyConnect setup has all RFC 1918 routing down the tunnel and the public IP space goes out via the local provider. I have a request that traffic to a particular site - let'scall it foo123.com at say 5.5.5.50 goes down the tunnel so as ...

mmedwid · 01-19-2016

I have 7821 MRA phones running 10.3.1.12 firmware reaching CUCM 10 via Expressway. Is there a way of logging - say to syslog - whenever an MRA phone goes to "preservation mode". I'm trying to assess if the complaint of one MRA user - his phone going ...

mmedwid · 10-14-2015

Most of my sales folks have lots of contacts in their iPhone. If I install jabber on their iPhone and they use the client to call one of their contacts - jabber will try to call (npa)nxx-xxxx - but without the needed 9 to call out. What would be the ...

mmedwid · 10-14-2015

The manual below says you should be able to store your login information on your MRA phone. But if I look in System > Enterprise Phone Configuration, Device > Device Settings > Common Phone Profile, or Device > Phone I don't see anything relative to ...

mmedwid · 10-01-2015

So we have the 7821 MRA connecting to Expressway from outside and registering to call manager. But the problem is this: My users are going to have to enter their AD user name and password using the phone keypad no less than oncea week. On Expressway ...

mmedwid · 07-13-2021

Worked like a champ. Thank you.

mmedwid · 10-21-2015

The first thing we tried was setting the refresh interval to 0. This did not work to get rid of the required timeouts. I think we have the answer however in downloading and installing a new device COP file. In the lab our PS person found that propert...

mmedwid · 10-14-2015

Great - thank you.

mmedwid · 06-04-2015

On another document the issue was written more clearly: "CE: A 25-min-long PSTN/Jabber call became oneway audio after hold/resume". That makes more sense.

mmedwid · 04-10-2014

Checking monitoring of the UCS itself (which I believe is a representation of the active Fabric Interconnect) shows that memory usage over the last year never exceeded 20%.

Member Since	‎05-03-2001 11:58 AM
Date Last Visited	‎07-18-2021 11:57 AM
Posts	548
Total Helpful Votes Received	51

User Statistics

User Activity

Cisco AnyConnect: Adding a public IP to split tunnel

Logging instances of 7821 phone going to "preservation mode"

Jabber for iPhone off-net dialing

You can store your login information with User Credentials Persistent for Expressway Sign-In. Contact your administrator to enable this feature.

Cisco 7921 MRA to Expressway: Authenticating every week

Re: Cisco AnyConnect: Adding a public IP to split tunnel

The first thing we tried was

Great - thank you.

On another document the issue

Checking monitoring of the