About raymond00

raymond00 · 03-17-2014

Hello, All. I've come upon an issue with the 7965 Model Phones and the "Display On If Incomign Call" option. By default, CUCM has that option disabled. In order to combat this, I have modified a Common Phone Profile deployed to all phones. This has p...

raymond00 · 03-06-2014

Hello, All.I am testing a bulk upgrade of 7960 phones to 7965 using TAPS on CUCM 8.6.x. The 7960 phones each have a primary DN assigned to them and are currently routable. Unfortunately BAT does not seem to be playing nice..Method 1I left TAPS at the...

raymond00 · 01-31-2014

Hello, All!I am building a CUP 8.6 lab and would like to get a better understanding of how to bulk setup end users for Jabber. I've outlined the steps I know I want to complete, and how I think they should be completed. Would you mind reviewing and l...

raymond00 · 01-06-2014

Hello, All!I'd like to selectively block outbound CallerID on a SIP trunk. I've come up with two methods to block the CLID, but I'd like to know if there are better methods.From CUCMCreate a secondary SIP Trunk with Privacy enabled. Create a Route Li...

raymond00 · 01-02-2014

Hello, All!I would like to setup my CallManager 8.6.2 lab so that by default 7965 phones have their display come on when there is an incoming call. Based on the CUCM documentation, I configured both the Common Phone Profile and Enterprise Parameters ...

raymond00 · 03-17-2014

Hello, Yahsiel.Yes, I have confirmed the Override option is checked under Common Phone Profile. I believe the override is actually taking affect when the phone is auto-registered, as you would expect. However, the device is then overriding the Common...

raymond00 · 03-13-2014

Hello, All!I have continued testing this in my lab and have come up with the following results.When setting up a new device, TAPS will generate an error if the DN is already in existence across multiple devices.If replacing a device, you must use the...

raymond00 · 03-07-2014

Stephan,Would you please provide output for the following commands? Thanks.sh runsh isdn servicesh isdn status

raymond00 · 03-07-2014

Have I lost my marbles? I was under the impression TAPS could be leveraged to bulk upgrade from one model phone to another. However, after a call with Cisco TAC I was told TAPS isn't used when a DN already exists. Now I know I've used TAPS to repl...

raymond00 · 03-06-2014

Hello, Nishant. Thank you for your quick reply.I read the same document and specifically looked at issue 3.Issue 3After the DN is entered in a call to TAPS, the user receives this message: Unable to fetch a unique record even with the external phone ...

Member Since	‎03-01-2013 06:35 AM
Date Last Visited	‎09-28-2018 12:06 AM
Posts	44
Total Helpful Votes Received	9

User Statistics

User Activity

Cisco 7965 - Display On if Incoming Call Being Overridden

Bulk Upgrade Phone Models

Bulk Create CSF Profiles / Jabber Rollout

CUBE - Selective Outgoing Privacy Header

7965 Default - Display On When Incoming Call

Hello, Yahsiel.Yes, I have

Hello, All!I have continued

Cisco VWIC-1MFT-T1 Voice-Port Problem

Bulk Upgrade Phone Models

Bulk Upgrade Phone Models