Because Prime or LMS has no ability to backup FWSM and ASASM configurations, here I share our trick to do "backups" from a remote linux server.FAckup.sh stands for FWSM-and-ASASM-backup :-) It uses ASDM stuffs to get configs.Configuration file looks ...
Hi guys,I am using 3548 to connect to partners.I use a VRF, with static routes, and my VRF can ping hosts behind the next hop. Perfect.In my VRF, I can get routes from the default VRF :[...]vrf context myPartner address-family ipv4 unicast import...
Hi,I need to load balance my trafic across two unequal cost multipath (2Mbs and 4 Mbs). We have four routers(2600 and 3600) wich interconnect our sites and two unequal bandwidth lines (2Mbs and 4 Mbs). I would like to share trafic in 1/3 and 2/3 prop...
Well, after having many discussions about this, it seems that we are a little bit to early on that technology.We are using a 3548/3548/3048 trio for building simple low latency multicast delivery platform, and using fresh out of the oven NX-OS 6 with...
We are progressing.Supposing we forget the "default" VRF.Loopback (lo10, 100.100.100.1/24) <=> VRF prod <=> VRF partner <=> fiber <=> partner <=> target hostIf we create a production vrf and a partner vrf, and we import/export routes from bgp inter-v...
