Hi,The issue requires some debugging in order to verify in which state the connection is found, you will need to install a syslog server and send some logs to verify the problem at a time to have it, also, please issue the following commands at a tim...
Hi,Maybe as a personal suggestion you can use the summary option for these type of signatures so you wont see or get all the alerts, you can have a summary of them at a time to have some of them firedRegards,Sent from Cisco Technical Support iPhone A...
Hi,Another option is the use of the compression command, this is usually enabled by default but maybe you can enter it due to is not showed in the running config, the command is compression svc.Note: The command helps when we have low bandwitdh conne...
Hi,In this case should be necessary to enable Dtls, Dtls uses udp, avoids latency and increases bandwitdth. If Udp is blocked the Ssl connection will fallback to regular TLS. You can enable it in Asdm by ckecking it in the interfaceConfiguration/ rem...
Hi,I would call your Local ISP to check that so we wont affect other services. Also, make sure on having a static ip address, that ip will be used to connect from the outside and configured on the ASA external IP addressRegards,Sent from Cisco Techni...
