About lcd_shouldit

lcd_shouldit · 08-12-2014

Hi Guys, Can I connect M2 port to F2e port on my Nexus 7009 switchs directly? Or can't for QOS reason or something else.

lcd_shouldit · 03-27-2014

Hi guys, can I configure ip address on F2e port directly when it exits with M2 port in the same vdc ?

lcd_shouldit · 10-16-2013

Hi, there are 3 7.5Kw power supply in my Nexus 7010.and the redundant mode is REDUNDANT.So what is the exactly power should I provide for this Nexus in my rack.7.5 x 3 = 22.5 Kw ?Thanks a lot!

lcd_shouldit · 08-08-2013

Hi , I want to find router FAN series number, do you know which command can use ?Sent from Cisco Technical Support iPhone App

lcd_shouldit · 07-05-2013

Hi, could I configure vpc use one peer is Nexus 5010 and another peer is 5548 ?

lcd_shouldit · 10-16-2013

Hi, thanks so much!So, 3 PS will give me 11,250 W in this mode, which is the output.How about the input, Should I prepare 7.5 x 3 = 22.5Kw for this Nexus ?

lcd_shouldit · 08-09-2013

Got it.Thanks a lot , Leo and Marvin.

lcd_shouldit · 08-09-2013

Thanks Leo, Looks like below that there is no serial number with this show commandNAME: "GigabitEthernet0/0", DESCR: "BCM1125 Internal MAC"PID: , VID: , SN: NAME: "GigabitEthernet0/1", DESCR: "BCM1125 Internal MAC"PID:...

lcd_shouldit · 07-09-2013

Here is another link, which said normal and aggressive mode can both lead to error disable mode.http://www.cisco.com/en/US/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdfand the recommand is normal mode.

lcd_shouldit · 07-05-2013

Hi，thank you so much for your information.Sent from Cisco Technical Support iPhone App

Member Since	‎11-20-2011 01:08 AM
Date Last Visited	‎12-28-2020 06:39 AM
Posts	104
Total Helpful Votes Received	10

User Statistics

User Activity

Can I connect M2 port to F2e port directly? Or can't for QOS reason?

Can I configure ip address on F2e port directly when it exits with M2 port in the same vdc ?

Power should provided for Nexus 7010 in my Rack

which command to find router FAN series number

Nexus 5010 and 5548 make a VPC not available ?

Power should provided for Nexus 7010 in my Rack

Re: which command to find router FAN series number

Re: which command to find router FAN series number

UDLD

Re: Nexus 5010 and 5548 make a VPC not available ?