I have an unusual setup for SDWAN. I have 18 remote site that connect back to the main site. I am deploying 8200 and 4300 devices to the remote sites to replace the current routers. My main site is using 8300 routers to be the hub of the SDWAN enviro...
I am having issues getting both the enterprise and the management ports to be reachable on my DNA appliance. I put the default-gateway on the management and static routes on the enterprise and the enterprise is reachable but the management isn't. If ...
We are deploying 32 new IE1000s. I have deployed 5 using a temporary DHCP range on Vlan 1 through the main switch they connect to. Now that they have an IP address I can get into them locally, but I need to change the management IP and Vlan so they w...
I brought my DNA appliance online yesterday and got the initial configuration completed. Today I tried to log in through HTTPS and I get getting a "refused to connect" error. I am running version 1.3.3.9. Has anyone had this issue? The browser doesn'...
I have a DNA appliance in our lab that needs to be reconfigured. The cluster link was put on the wrong interface. I can't figure out how to reconfigure the interfaces and move the cluster link. Does anyone know how to accomplish this without opening ...
I opened a TAC case and they confirmed that VPN0 is the only way to get Edge routers to communicate with the vManage and the controllers. So now I am looking at getting a 2nd VPN0 interface connection to my core. Thanks for the help!
Currently our Internet terminates on the firewall, that connects to the core switch. The SDWAN routers will connect to the core routers and the remote sites are using a separate ISP connection to connect to the SDWAN router. It is set up currently li...
They are in different subnets. Mgmt - 10.255.155.x /24, Enterprise - 10.255.255.x /24. I tried 10.255.255.0 255.255.255.0 10.255.255.1 as my enterprise route with mgmt being default-gateway, but it didn't work. I finally put the enterprise route as 1...
I tried both but neither one worked. I when into the KVM and found that some of the interfaces were not configured the way I put them in, and the cluster link wasn't attached to any interface. It would not let me modify anything in this state so I ha...
