Hi,I want to connect WS-C2960S-48TD-L switch to WS-X6708-10G-3CXL module in Cisco WS-C6503-E switch. WS-X6708-10G-3CXL is C6K 8 port 10 Gigabit Ethernet module with DFC3CXL which requires X2 module. on the otherhand, WS-C2960S-48TD-L requires SFP+. N...
Hi,Can anyone help me with UCM licensing for CP-3905 IP phones. As I know, only CP-6901 & CP-6911 phones require basic license, all the other IP phones use Enhanced license. Being a SIP phone, what license is required for CP-3905.Regards,Sagar
Hi,Can anyone help me on how to configure third party IP Phone with CUCM. I have been trying with one NET320 IP phone but to no avail. I haven't found any TFTP configuration in the phone. Any help in this regard is highly appreciable. BR\\Sagar
Hi,In our network environment we have an ASA5505-UL-BUN-K9. Now we have purchased ASA-SSC-AIP-5-K9= card for IPS and want to upgrade the firewall for IPS functionality. Can anyone tell me what other software or Cisco service for IPS is required.BTW, ...
Hi,We have MDS9222i in our data center. There are two SAN in the environment - IBM & Brocade. IBM SAN connectivity between DC & DR are through dark fiber now. This is true for SUN storage networking as well. Now we want to connect both IBM & SUN stor...
Hi Chris,By the time of opening this discussion, I had finished preparing the platform for Unity installation. I will start installing unity software very soon. Before that can you tell me if there is any way that we don't use unity exchange for send...
Hi Abdul,Thanks for your quick response. Yes, UCL is required for CP-7905 IP phone & I want to know what kind of UCL (basic or enhanced) is required for this phone when used with CUCM 8.6. Data sheet didn't help me finding the answer.Regards,Sagar
