Level 1
Level 1
Member since ‎11-23-2002

User Statistics

  • 37 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 5 Helpful votes Received
Recent Badges
1 Helpful Vote
20 Replies
10 Replies
5 Replies

User Activity

Hello,We're running Unity Connection 7.1.3 and we want to integrate that with an NEC 2400 PIX. We have purchased a TIMG unit. Question is very simple: how do I configure the T1 on the NEC? Will it be a CAS using E&M? What about framing and line codin...
Hello,I am trying to fax from a VG224 configured as MGCP. I have a 2821 configured as a H323 CUBE. A Verizon SIP trunk is connected to the 2821. So the fax flow is this: VG224-->H323 CUBE-->SIP-->SIP provider. I can't make it work since the fax call ...
Hello,I have two separate 6.X Presence cluster installed. Each Presence cluster is connected to its own Call Manager cluster. I have set up an intercluster trunk between the two Presence cluster. The trunk is working fine. The Troubleshooter reports ...
Hello,I'm running Call Manager 3.3.2 SPB with a VG200 gateway. The VG200 is running MGCP. We're using 9.@ for our route pattern. The problem is that when a user picks up a phone, dial a 9 (outside access code), they'll get a dial tone (which is norma...
Hello,I am running CM 3.2.2c SPF. I just cannot dial any 7-digit local numbers. It would wait for about 10-15 seconds and then I'd get a busy tone. But if I include 1 and the area code (eventhough I'm dialing within the area code), it works. Long dis...
Community Statistics
Member Since ‎11-23-2002 11:32 AM
Date Last Visited ‎08-29-2018 12:01 AM
Posts 37
Total Helpful Votes Received 5
Helpful Votes From