you can take database backup of the node using TL1 by following method.
For this, you have to map FTP server to the ONS.
We need to follow the following instructions to register the FTP server over ONS nodes.
FTP server registration is the initia...
Open a TL1 session for the ONS node, and then use the TL1 copy-rfile command:
copy-rfile::rfile-pkg:1::type=swdl,src="ftp://username:password#ftp-ip-address/package";
So for example, for username=cisco, password=cisco15, ftp server=10.89.148.3, then ...
Hello,
if you install XCVT, the node assumes its a SONET chassis, in SONET there is no concept of MultiShelf,
if you want to make MultiShelf, have to remove XCVT (cross-connect) card.
thanks.