Leo Laohoo

Leo Laohoo · 06-25-2009

Hi Sameer, Console into your AP and in enable mode, type the command "lwap ap controller ip address ...

Leo Laohoo · 06-25-2009

Hi Kevin, If you have a USB to serial adaptor, the break sequence may be something different.I've he...

Leo Laohoo · 06-25-2009

Thanks for the ratings, Zeeshan.

Leo Laohoo · 06-25-2009

Hi Zeeshan, Depending on the model of the switch, I'm not a big fan of the "sh interface " to look a...

Leo Laohoo · 06-25-2009

Hi George, Thanks for the ratings. If your current version supports the feature you need, would you ...

Leo Laohoo · 06-25-2009

Yes. Just make sure STP Portfast is disabled.

Leo Laohoo · 06-25-2009

Cisco Interactive Product Advisor (Wireless)http://www.ciscowebtools.com/ProductAdvisor/wireless.asp

Leo Laohoo · 06-25-2009

WiSM running software version 4.2.205.0 and WCS version 4.2.128.0? Shouldn't the WCS be of the highe...

Leo Laohoo · 06-25-2009

Which controller model supports upto 8 AP?Do you want a stand-alone appliance or a module? The WLC-2...

Leo Laohoo · 06-25-2009

Try this: Configuring Wired Guest Accesshttp://www.cisco.com/en/US/docs/wireless/controller/6.0/conf...

Leo Laohoo · 06-25-2009

Hi Ahmed, 1. You can use AIR-ANT24120 or you can use 3rd party products. If you do use 3rd party kit...

Leo Laohoo · 06-25-2009

Hi George, When it comes to IOS upgrades, we follow the old adage "If it ain't broke, don't fix it"....

Leo Laohoo · 06-25-2009

Hi Joseph, Edison's correct. When it comes to IOS upgrades, we follow the old adage "If it ain't bro...

Leo Laohoo · 06-25-2009

Hi Chuck, I'm happy to hear the solution works. Thanks for the ratings.How about the power issues? A...

Leo Laohoo · 06-25-2009

Hi Jay, The break sequence MAY have been disabled (on purpose) in the configuration with "no service...

Date Registered	‎06-22-2008 04:57 PM
Date Last Visited
Total Messages Posted	51,467
Total Helpful Votes Received	31796

Re: LWAPP Registration issue