Cisco 3850: IOS-XE/Firmware Upgrade
This procedure is aimed at Cisco 3850 switch ONLY.IOS-XE Bundle Mode is not covered. 9300, 9500 (vanilla & high-performance), ISR 1k, ISR 4k and ASR is not covered. Router(s) & switch(es) r...
NotesA Word from our Sponsors:Introduction:Section 1: General ProcedureSection 2: ROMMON UpgradeSection 3: Cellular Modem Firmware UpgradeSection 4: GOTCHA
This procedure is aimed at Cisco ISR 1k, ISR 4k and ASR 1k router ONLY.IOS-XE Bundle Mo...
This article is to provide better (and understandable) information to non-Cisco readers. For example, Bug ID does not include any useful command(s) to help non-Cisco individuals troubleshoot. Bug ID also states "Catalyst 9K", however, no...
@rakesh nair wrote:
So the only option is to console to the AP directly
No. That is not what I said.
By default, telnet and SSH access to the AP is disabled.
HINT: Look at the controller. Monitor > All APs > Detail > click the AP > Go to the Ad...
@Leo Laohoo I am afraid to say don't know the procedure of the FPGA cause am doing this first time, however if you have steps to perform specifically in this case please share with me I will follow that one. thank you.