Hi @SA2 ,
Thanks for the additional information. Here's what I can see so far.
Scenario 1: (same vlan on both sides)
Glad that it worked. I had never tested it and there are probably many limitations (such as explicit-null not working)
Scenario 2: (d...
Hi @pevans1970 ,
By default, iBGP routes are not redistributed into the IGP. You need to configure the following command for this to happen.
router bgp 100
bgp redistribute-internal
Regards,
Hi @rookie R ,
> However, R111 itself can not use these routes, such as advertising those to R111's BGP neighbors, right?
This is correct. The route reflector will retain and advertise all of the VPNv4 routes even though it does not have the RT confi...
Hi @Student690 ,
Pinging from R5 to R6 gi0/1 doesn't require any route on R5, as it is directly connected. Pinging from R5 to R6 gi0/0 does require a route though, as it is not directly connected.
Try adding the following default routes.
R5:
ipv6 rou...
Hi @noforshow92 ,
> It seems like only the port that connected to the third router can function as a source and destination
I have not done extended testing, but it looks like it is the case.
> Another thing, why doesn't my CLI recognize the mtu com...