johnlloyd_13
Level 9
Level 9
Member since ‎12-02-2007
‎04-24-2024
Awards

User Statistics

  • 3712 Posts
  • 267 Solutions
  • 2304 Helpful votes Given
  • 1482 Helpful votes Received

User Activity

hi,i'll be configuring a new N9K switch to replace a C9300.my question is, can i configure in advance the port-channel and vPC in the N9K even without the SFP inserted and fiber cables patched?just want to prepare the config so it will be a faster to...
hi,i'll be changing an ISP/BGP peer. my question is, do i negate first the old bgp router-id or just directly configure/apply the new router-id?do i need to do a "clear ip bgp" to establish the new ISP/BGP peer?router bgp 65123 neighbor 63.21.16.4 sh...
hi,i need to migrate G0/0 "outside" and G0/1.xx "inside" sub-interfaces to a new port-channel1 interface.can't seem to pre-configure the same sub-interface VLAN and ip address under the same context.can someone advise what is the best approach and wi...
hi,i have 2 private IP that would need to configure to a NAT pool of /29 public IP.can someone confirm if below config is correct?do i need to add the "flat" keyword to "PAT" using 1024-65535 dynamic ephemeral ports or this is automatic?will both pri...
hi,i need to add an additional VLAN in the FW "inside" interface to a switch. but currently the switch is configured to a single VLAN 30 and will need to configure as trunk.i only have IPsec VPN via internet to this remote site using VLAN 30 on the "...
Community Statistics
Member Since ‎12-02-2007 03:31 AM
Date Last Visited ‎04-24-2024 12:05 AM
Posts 3,712
Total Helpful Votes Received 1482
Helpful Votes From
Awards
Community Spotlight Award
Mobile App Contributor January 2012