About Scott Leport

Scott Leport · 07-07-2021

Hi Folks, I am sure this is an easy one for someone in the know, but couldn't find a definitive answer on here, hence the question. I am looking to upgrade the IOS-XE of a pair of ASR1001-X routers (two standalone routers, not in HA) from 16.9.5 to t...

Scott Leport · 11-23-2015

Hi there, CUCM 9.1.2.12901-3 and Jabber 11.1.1 22531 Got a strange problem where if I enable DND status from the phone, status on the phone has updated to reflect, but has not updated on the Jabber client. The status on Jabber is still "Available" ...

Scott Leport · 08-26-2014

Hi,We have a strange issue which is doing my head in.CUCM Version 9.1.2-10000-28Arc Console Operator 5.1.4.1996When some users are using CIPC softphones they do not appear to listed as available in the Operator Console, however some users who use CI...

Scott Leport · 12-13-2012

Hi there,Our customer has a requirement where they want an IVR to greet all callers who dial their main number. The IVR will play a greeting in Spanish and if the caller presses "9" the same greeting will play again in English. We have this working a...

Scott Leport · 03-13-2024

When you say it doesn't work, can you be more specific? Have you taken and reviewed any ccsip debugs? I am not convinced this is your issue. From my experience, the ITSP supports the codec or they don't. However, it might be worth ensuring that you...

Scott Leport · 03-06-2024

Hi, What type of calls are you experiencing this with? On-net calling between phones in the same or different cluster? Is it with internal to external calling? If it's the former, does the site with the problem phone match the same route pattern that...

Scott Leport · 01-31-2024

Hi Folks, I ran into this issue recently with FMC 7.2.5 and for what it's worth, there is a lot of good info here which helped me out. However, the fix for me was to uncheck "Automatically rename existing files on overwrite" option in the Solarwind...

Scott Leport · 10-12-2023

Plan Direct Routing - Microsoft Teams | Microsoft Learn Sections "SIP signaling: Ports" and "All environments" under the Media traffic port ranges section.

Scott Leport · 06-20-2023

Hi, If the signaling is working but RTP is not, check your firewall or Internet gateway to ensure that you're allowing the range of RTP ports the conference phone is using.

Member Since	‎06-26-2011 11:52 AM
Date Last Visited	‎03-13-2024 07:15 AM
Posts	371
Total Helpful Votes Received	671

User Statistics

User Activity

ASR1001 IOS-XE Upgrade

DND status on IP phone not updating in Jabber

CIPC not showing on operator console

Setting up PLAR with Cisco Unity Connection

Re: CUBE need help with SDP header manipulation

Re: En Block calls work digit by digit not working

Re: CSCvk40714 - Unable to configure SSH option for Remote Storage

Re: Direct Routing for Microsoft Phone System with Cisco Unified Bor

Re: One way voice - outbound calls - isolated to ClearOne conference p