About sfallai01

sfallai01 · 07-27-2013

I have a Cisco 2610 router and Cisco SF300 switch set up like so:Cisco 2610 (IP: 192.168.16.1) --> Cisco SF300 (IP 192.168.16.254) --> VLANs 20/30/40 etc.Only computers on the .16 subnet can access the internet, from my understanding this is due to n...

sfallai01 · 07-13-2013

Hi,Let me preface this with the fact that networking is most definitely not my strong point, so any help here is greatly appreciated.I am trying to segment out some virtual desktop infrastructure onto its own VLAN using a Cisco SF300-24 Layer 3 switc...

sfallai01 · 07-25-2013

Tom Watts wrote:Hi Simon, does your router support the vlans? Otherwise the router will require a static route pointing back to the SVI of the switch.Here is an example post-https://supportforums.cisco.com/thread/2123434-Tom Please mark answered for ...

sfallai01 · 07-25-2013

Shereef Ibrahim wrote:Thank you for the information. I have enabled layer 3 mode. But the problem currently I am facing is inter vlan routing.The 192.168.2.0.24 (VLAN 10) network is not able to reach 192.168.3.0/24 (VLAN 20) and vise versa.I could se...

sfallai01 · 07-24-2013

Ok, I've almost got everything working correctly now, I just can't access the internet from anything other than VLAN 1's subnet.Here is my setup that works as far as VLAN routing:T1 Router (192.168.16.1) --> Cisco SF300 VLAN 1 (192.168.16.254) --> VL...

sfallai01 · 07-19-2013

Thanks Tom,You put me on the right track, adding a default gateway to the adapter let me start to route data across the network/VLANs.Thanks for your help.

sfallai01 · 07-18-2013

Tom,I suspect you are correct.I configured Routing and Remote access on a Windows server with a static route 192.168.20.0/24 --> 192.168.16.6 (VLAN 1 IP)From that server (only) I can ping VLAN 20 computers and VLAN 20 computers can ping that server (...

Member Since	‎07-13-2013 11:07 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	10

User Statistics

User Activity

Cisco 2610 - VLANs and routing

Need help with SF300-24 VLAN configuration

Need help with SF300-24 VLAN configuration

How to create routed port in Cisco SF-300 Switch

Need help with SF300-24 VLAN configuration

Need help with SF300-24 VLAN configuration

Need help with SF300-24 VLAN configuration