I restored from backup and everything is fine with SNTC 2.10.CCO login is another story. It keeps failing my CCO login.Weather using CCO my login id, or email address, fails to authenticate. Is this normal behaviour?
Prime Infrastructure can no longer register using Smartnet portal or satellite.This is unacceptable mishandling of upgrade process.Cisco is asking me to revert back to Traditional Licensing.Does anyone know how to go from SmartNet to Traditional?CSCv...
My vEdge 2000 running 19.2.2 for years, just broke its vrrp when upgraded to version 20.4.1.Physical interface works fine, but vrrp address fails to populate arp, so it does not answer. Cisco TAC gave a temp fix of shutting Master device interface, a...
Does anyone know if it is possible to upgrade rom-monitors on ISR devices via vManage? On IOS-XE, upgrade file contains rom-monitor upgrade file - latest version is. But on vManage, how do we orchestrate the upgrade of cEdge, along with rom-monitor u...
The only way you will get this to work is via tftp: or ftp: plug mgmt0 into network with dhcp.under vpn 512, int mgmt0, ip dhcp-client, commitexit out request software install tftp://x.x.x.x/viptela-19.2.2-mips64.tar.gz vpn 512 request software set-d...
Do this:1. Reboot2. Break3. In Rommon, insert FAT formated USB Flash with IOS-XE bin file.4. boot usb:/filename.bin5. Format bootflash:6. Copy from usb: to bootflash:7. reboot
Looking at your error message, the template was trying to apply this config:vpn 0 interface GigabitEthernet1 tunnel-interface encapsulation ipsec weight I would look at the gnerated config before applying and make sure:#1. Ther...
