Hi,Posting here as the answers seems hard to find and/or create even more uncertainty.We are considering deploying an active/standby pair on ASA 55xx-x with the CX blade, in multi-context mode.There are rumors the CX functionality only works from ins...
Hi,Full mesh in the network using ISR and DMVPN. Security needs to improve - no firewall between the connections - therefore I feel they needto move to flexvpn on CE ISR to central ASA from the -X series.I know migrating from DMVPN to flexvpn should ...
Hi,We have a network consisting of 7Ks with 5Ks on leaf, on two sites. Between the sites, we have fabricpath enabled. The 7Ks run 4 VDC's each and vlans are separated using topologies.One of the VDC's is up and running, however the second one has som...
Hi,The question below seems hard to get answered, who can help? ASA release 9.2/9.3ThanksAll the abundantly available documentation mentions [=>] specific key usages and extended key usages, which fields need to be filled , however documentation cont...
Hi,From the Q&A Nexus 1000V below an excerpt of the requirements on ESXi. What I wonder, when I have 50 VEMS (or 50 physical hosts) do I need 2G memory (VSM) and 50*150M or 7.5G for the VEMs, so total 9.5G? Or does the 150M sit as process in the phys...
I appreciate your reply, please find below my filtered addition.CX blade working both ways = answeredCX blade and multicontext - complex, but answeredAccording to the engineers installing the ASA/CX, I need to define the policy. Since the CX can work...
Hi Heather,The first link is not related to the question, unfortunately. The question is not how to setup the certificates, it is about certificate requirements: what fields need to be used? The second link shows examples, which we have found also. D...
Hi Heatther,Thanks sofar, I will have to read those and assemble the replies for the collegues who need this information. I will get back to you either with more questiions or to mark this as the correct answer.CheersPaul
Hi Charles,FWIW:We use FP to enable a smooth transition between locations, as we are on the move. DC A and DC B are FP interconnected. Since DC A is relocated, we just have to add DC A" to the FP cloud. Then we just have all vlans available in DC A"....
