About eddiebrown1986

eddiebrown1986 · 07-16-2013

Hello Fellow Cisco Professionals,I am looking to grant public access to a private RDP server via RD gateway. Now I have set up the front end of this server but am having difficulties in deciding what I should do about the backend access. I have an 89...

eddiebrown1986 · 07-23-2013

This has been resolved, I was using the extendable command, and decided to not and BAM! I am able to access the webpage now.

eddiebrown1986 · 07-23-2013

Hello Cadet,I think you should get rid of the security and try to connect to the server from outside with only NAT enabled.Can you tell us if it is working this way ?Before you suggested to use the CBAC and apply my ACL to the outbound interface I ...

eddiebrown1986 · 07-22-2013

Hello Cadet,I have configured CBAC and applied the access-list to my outside interface pointing inbound. Yet I am still unable to gain access to my webserver. I went to grc.com and used "sheild's up!" to test my opened ports and it is reporting that ...

eddiebrown1986 · 07-22-2013

Hello Fisher,Not sure if those notifications are from the console or telnet interface. If it is from telnet you may want to monitor the console interface to see a more descriptive output. Also check out this link: http://www.cisco.com/en/US/tech/tk3...

eddiebrown1986 · 07-22-2013

Hello Guca,That is not enough information.If that is part of the router config can you please post the entire confguration.Thanks,Eddie

Member Since	‎07-16-2013 10:33 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	10

User Statistics

User Activity

Allowing port 3389

"Opening" Up ports 443 and 80

"Opening" Up ports 443 and 80

"Opening" Up ports 443 and 80

Re:access-ports randomly Flapping

connectivity issue on CISCO6503