Dear,we running cluster of Cisco ASR9001 on IOS XR 6.1.4, and suddenly rack1 crash down and reboot with led 'LC fail' on you can see below the output of show platform command:Node                        Type                                    State  ...

Hello, we have an issue with asa firewall(9.5) when configuring Anyconnect such as that our public ip address are not configured on outside interface but as a pool for nat, we have private subnet with our service provider (/30) to our router ,and oth...

Hello, We try to use our both dsl line at the same time using load charing with PBR on ASA firewall 9.5 PPPOE interface Config interface GigabitEthernet0/2 nameif outside security-level 0 pppoe client vpdn group ADSL1 ip address pppoe setroute!inte...

hello, we have problem in our ASR9001 Ver 4.3.4, after an accidental power off due electrical problem, led LC fail still red and line card (module and interface) not shown as active see here some output  RP/0/RSP0/CPU0:ASR9001-01#show platform Tue No...