About Ashley Griffin

Ashley Griffin · 03-19-2015

Hi all I have had some minor issues with the SPA500S and the SPA525G2 when using it with the UC320W, currently all the phones (SPA525G2) i think are hardware v2 or v2.1.1 with firmware 7.5.2(u2), I understand to get the latest firmware v7.5.7 on to t...

Ashley Griffin · 09-16-2013

HiI have a SP525G2, undertion options > 7 > 5 (Call Record Configuration) both options have check marks.I have a USB drive inserted (FAT32), options > 10 > 5 > says USB connectedOutside calls are not recorded and niether are internal ones, how do i d...

Ashley Griffin · 08-04-2013

HiIt appears the SPA525G2 supports direct SIP URI, however as this phone is part of the UC320w system, is there a way of storing and dialing the SIP URI "number" for someone?Second to this is the UC320w able to receive a call like this from another p...

Ashley Griffin · 08-03-2013

Hi allI have the SPA525G2, at least 1 with the SPA500S side car, I looked on the internet for a template for the labels, found one in word that didnt work (was to long when printed).Being a Network Specialist and document designer, i made my own and ...

Ashley Griffin · 08-02-2013

HiI have a SIP trunk, its working, however is there a way of getting the UC320W to re-register the trunk at certain times?I assume it will need a PMF, the below 2 look good but an explantion of how this works would be nice.SIP_Trunk_Register_Timeout....

Ashley Griffin · 03-21-2015

Hi I am aware the UC series from Cisco is EOL, however we are looking for a closed system which seems to be hard to find thats as good as the US320w. Items like 1 button Parking Orbits that work, seem impossible to find in another system. For documen...

Ashley Griffin · 03-20-2015

Hi Thanks for the clarification, i noticed with every phone i added it did a firmware "upgrade" inline to what the UC320w wanted, however this also means not all SPA525G2 will work with the PBX if its firmware is too new.Inline with this, i think i w...

Ashley Griffin · 03-20-2015

Does this mean even if we upgrade the phones then re-add them to the UC320 system it will "downgrade it" to what it wants? I have seen other upgrading there phones and fixed issue they had when using it with the UC320, however this was the reason i w...

Ashley Griffin · 03-19-2015

When i did research on this (i use the UC320w which only supports the SPA500S), i seem to remember you can use 2 but they need to be the same ones.... (at least with the SPA500S).

Ashley Griffin · 03-19-2015

I found it, i have to start the recording manually (incase anyone wants to know).

Member Since	‎07-28-2013 04:47 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	21

User Statistics

User Activity

SPA525G2 latest firmware to work with UC320W (v7.5.7 ok to use?)

SPA525G2 call recording not working (registered in UC320w)

using SIP URI address as phone number (possible?)

SPA500S label template (that works)

SIP register timings

Hi I am aware the UC series

Hi Thanks for the

Does this mean even if we

When i did research on this

I found it, i have to start