About sina tahmasebi

sina tahmasebi · 03-24-2015

Hi FolksI have configured anyconnect VPN on our corporate ASA and it's working fine with split tunnel and I can access Internet when connected. Can you please let me know how can I access my inside network and beyond that? I don't have access to my i...

sina tahmasebi · 03-04-2015

Hi Folks, I'm trying to configure anyconnect for a testing purposes on our corporate network. I have an ASA connecting to a Lan with a Class B network configured on inside interface and another class B network on outside interface. the routing is con...

sina tahmasebi · 03-04-2015

Hi Folks, I'm trying to configure anyconnect for a testing purposes on our corporate network. I have an ASA connecting to a Lan with a Class B network configured on inside interface and another class B network on outside interface. the routing is con...

sina tahmasebi · 01-21-2014

Hi everyone, I have to work on a 1811 Series router at my work and scrub some configurations off of it and hand it to another company. As part of the process I had to configure a temporary easy telnet access and then leave the device to them so they ...

sina tahmasebi · 08-13-2013

Hi guys,I'am trying to enable SSH on my 3550 EMI switch and my IOS version is c3550-ipservices-mz.122-44.SE6.bin which I uploaded to the switch today and Cisco says it has crypto feature. I can't enable crypto and SSH. Can you help or give me a hint ...

sina tahmasebi · 03-30-2015

Just to highlight, my inside and outside subnet is class B public IP and my pool Address is class C Private address range. All my access lists are also in place and I think they are ok. I can copy them here if you'd like to have a look.

sina tahmasebi · 03-30-2015

Hi Adeolu, Yes I have a directly connected 4506 switch that is conencted to out core Switches and runs EIGRPI have statically routed that pool on that switch to point to inside interface of the ASA and redistributed it to into our EIGRP!

sina tahmasebi · 03-22-2015

Thanks alot for the reply David. the issue is fixed now. The problem was I had a wrong IP address in my outside interface.It was just a typo. Thanks alot for taking time and answering my question. Regards, Sina

sina tahmasebi · 08-14-2013

Oh that was right I downloaded th one with K9 and it's working now.Thanks Leo.

Member Since	‎08-13-2013 06:20 PM
Date Last Visited	‎09-28-2018 12:06 AM
Posts	11

User Statistics

User Activity

Accessing inside network with anyconnect

Anyconnect Configuration issue

Anyconnect Configuration issue

cannot telnet

3550 SSH and Crypto issue

Just to highlight, my inside

Hi Adeolu, Yes I have a

Thanks alot for the reply

3550 ios issue