Cisco Access point not able to join the 8500 WLC Port on switch does not come up Access point gets power from 3850 switch however the interface does not come up IOS Bootloader - Starting system.flash is writableAntigua Lite Board P240MB formatTide ...
Good Afternoon All, Certification's :- CCNP & CCDP What is the correct path to kick start my road map to CCIE R&S Would i need to Certify in CCNP Enterprise Core ENCOR first or can i go straight to CCIE Lab ?
HI , please advise what the correct process is to upgrade the software on my 8510 wireless controller what do I download or do I do a full upgrade what is the implication when upgrading ( does all ap have to rejoin and upgrade all the images ) Manuf...
Hi ,
I've read your post on "Unable to change boot file on Cisco 3850 "
Have action your instruction and works well untill the switch reloads
I've attached the full upgrade in a txt file
Assistance would be greatly appreciated
Regards,Theod...
Hi Leo , Ap doesn't get an ip add - port on the 3850 only provides power I've change the cable , same thing apologies , my staff has formatted the Flash: - tried loading the IOS again with no success - seems that the ethernet port could be faulty
to add to Rasika has said - check SVI there might be a Helper ID interface ethernet0/0 ip address 192.168.100.1 255.255.255.0 ip helper-address 10.55.11.3 DHCP IP Helper addresses are IP addresses configured on a routed interface such as SVI or a ro...
Hi,
I've tried to upgrade or downgrade the switch to 2 different IOS an still get different errors
I'm interested to understand what the problem is as I've got 3 switch which is down
Business critical devises
see below :
switch: setABNORMA...