About Frameschubser

Frameschubser · 01-20-2014

Hi all,me study for ccna voice and me do not have isdn to test. But me want to know how the digits flow through a incoming dial-peer with incomming called number set. Lets asume the call comes in through isdn.called number ( called from pots - not fr...

Frameschubser · 08-25-2013

Hello,if i connect some CIPC to CME, this CIPC get EFXS ports numbered 50/0/x automatically. Also there will be automatically created the corresponding dial-peer with tag 2000x. Thats nice in the first look. But me cant edit/modify these ports or dia...

Frameschubser · 07-29-2013

Hello!As far as i understood the IP SLA can ping an interface of a specific router automatically. Then the track in a route-map, e.g. "set ip next-hop verify-availability 3.3.3.3 track 10" take care and if the IP SLA says "status up", then "next-hop"...

Frameschubser · 01-20-2014

Thank you so much And yes, me missed also the link in your link where it is described if telco do not set DID - shame on me But you bring be back on track

Frameschubser · 01-20-2014

Ah, i read it before but it seems i missed something So it depends on the DID? If no DID then 12345 is forwarded and cause of that -> no match to the phone?If DID then 123456789 is forwarded? If so, what is if the provider dont provide DID but me wo...

Frameschubser · 08-26-2013

Ah, thats new to me: translation-profiles on ephone-dn.I looked therehttp://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#configsTrunk Group/Source IP Group/Dial Peer/Voice Port/Non-Facility Associated S...

Frameschubser · 08-25-2013

So as i understood: If i have 2 CIPC connected at same CME and do a call from one CIPC to the other, me dont have a chance to translate the calling number of the calling CIPC in e.g. the receptionist number so that the called CIPC see the receptionis...

Frameschubser · 08-25-2013

Hm, and what about e.g. translation-rules/profiles on this dial-peer if i cant modify this dial-peer?Also me also cant create a new dial-peer pointing to a 50/0/x port. Why is this? And how can i modify/change it?

Member Since	‎07-29-2013 04:32 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	9

User Statistics

User Activity

Incoming called-number, isdn, how digits forwarded?

CIPC and EFXS 50/0/x and DIAL-PEER 2000x and how to modify?

IP SLA ping track with "negative trigger"?

Incoming called-number, isdn, how digits forwarded?

Incoming called-number, isdn, how digits forwarded?

CIPC and EFXS 50/0/x and DIAL-PEER 2000x and how to modify?

CIPC and EFXS 50/0/x and DIAL-PEER 2000x and how to modify?

CIPC and EFXS 50/0/x and DIAL-PEER 2000x and how to modify?