A9K-MOD400-TR has 2 bays (0 and 1)
I would like to know from layout perspective on an A9K-MOD400-TR , which one is bay 0 and bay 1. There is no documentation that describes that layout.
looking the module on front, inserted on the chassis.
I am looking for the ASR9910 chassis layout diagram since is not present on the ASR9000 series data sheets.
I would like to know the slots where i should insert the RSP0 and RSP1.
Some docs specify on slot 0 and 9, however another specify on slot...
I have an existing pair of Nexus 7009 with a vDC #1 (apart from the admin vDC). Each one has SUP2, OS 6.1(2), 5 x FAB-2 and N7K-M148GT-11L, N7K-M224XP-23L linecards.
All the linecard ports are currently assigned to the existing vDC#1
I need to cr...
I am planning to design a DC with Nexus 5596 and 2232 / 2248.
Thinking about the transceivers to interconnect with 10GE the Nexus 5596UP with a Nexus 2232 FEX.
The question would be, in that interconnection:
I know that 2232 supports 10GE with FE...
License Is not using grace period, should show that on comments or expiry date.
I have no grace period alerts popping up either.
VDC#1 has no interfaces allocated. VDC#2 has all interfaces allocated.
Weird thing is that both VDCs are enabled and ...
John,As you didnt see present ip nat inside in old router, might confused you. However, in old router already exists 'ip nat inside' and 'ip virtual-reassembly in' on serial as well as on multilink config.I forgot to paste it in first post.so my gue...