About rafabricant

rafabricant · 08-27-2013

I have a Cisco 1841 router and a Cisco 2950 switch. I am unable to get out of my network. I have ran various scripts and still no luck. Here are my Scripts maybe someone see what im missing. ThanksCisco 1841:Int fa0/0no shutdownexitint fa0/0.99descri...

rafabricant · 08-27-2013

I used my CCNA Portable Command guide and used the following commands but still nothingip nat pool home 192.168.1.1 192.168.1.2 netmask 0.0.0.255access-list 1 permit 172.16.100.0 0.0.0.255ip nat pool server 192.168.1.1 192.168.1.2 netmask 0.0.0.255ac...

rafabricant · 08-27-2013

access-list 101 permit tcp any anyaccess-list 101 permit udp any anyaccess-list 101 permit icmp any anyaccess-list 101 permit tcp any any establishedaccess-list 101 permit tcp any any ackaccess-list 101 permit tcp any any pshaccess-list 101 permit ud...

rafabricant · 08-27-2013

Here is my Run Command if this helps.interface FastEthernet0/0 no ip address duplex auto speed auto!interface FastEthernet0/0.99 description Native VLAN 99 encapsulation dot1Q 99 native ip address 172.16.99.1 255.255.255.224!interface FastEthernet0/0...

rafabricant · 08-27-2013

I'm not sure if im following. On fa0/1 run the command of ip nat outside source static 192.168.1.1 192.168.1.2

rafabricant · 08-27-2013

ok thank you, I have switched int fa0/1 to ip nat outside but still can not get out of my network.

Member Since	‎08-27-2013 12:30 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	6

User Statistics

User Activity

Issue with ISP and Cisco 1841 router

Issue with ISP and Cisco 1841 router

Issue with ISP and Cisco 1841 router

Re: Issue with ISP and Cisco 1841 router

Issue with ISP and Cisco 1841 router

Issue with ISP and Cisco 1841 router