Hi,I've read up a fair articles detailing how to migrate/upgrade from ASA 5510 to a 5525-X and attempted this today without much luck.I have basically copied the existing config on the 5510, edited the Interface names to reflect that the 5525 has all...

Hello all.Could anyone point me in the right direction regarding the dilema below.I have a pair of ASA 5510's running with VLAN Sub-interfaces. For simplicity i'm going to label them 1.3 (192.168.12.0/24) and 1.16 (172.16.100.0/24)Connected to VLAN.3...

Hi all,At the moment our network infrastructure is made up of 6 x 3560-E's and 2 x Cisco ASA 5510, running in Active/Standby. The 3560's are interconnected via 2Gbs EtherChannel port groups as we were hitting bandwidth limits on the 1Gb ports. We hav...

HI,We currently have the following network configured within our infrastructure.2 x Cisco ASA 5510’s configured in Active/Standby Mode6 x 3560-E Catalyst Switches2GB EtherChannel connections between switchesThe ASA’s have an Outside Interface with Se...