Hi,I have CUCM 9.2 I configure 7821 to do hot line (PLAR), We created the CSS, Translation pattern and all necessary configuration. But it dosen't work with 7821 SIP. But the same configuration work with 69XXToms
I currently have 2 X 6296 ucs Fabric connected to CISCO SAN Switch (VSAN default) with Hitachi storrage.I have 4 B200 bladesIn this setup two of my b200 blades boot from the SAN. (Esxi 30GB and storrage 1TB) for Call managerNow my storrage team brin...
Dear Anthony,I am trying write a simple script which I need to accomplish the following.If the calling number ( Customer Number) XXXXXXXX, I should check this number in an XML file and if it is there I need to set priority for that number 10 other wi...
Hi,I am facing a problem in CME/Unity express with the followingSIP Trunk PSTN Call -------- Unity Express AA ----------- Trnasfer to CME extension - Takes about 2 minitue to transfer the call to the extension.However when I call internally to AA...
1. Call Routing -> Dial Rules -> SIP Dial Rules and click Add New. For the dial pattern select 7940_7960_OTHER, assign Button 12. Create CSS and partetion3. Create Translation pattern and assign the css , called party transform mask4. Go to the phon...
I use the option B with csv in repository, because it is quite easy for updating the numbers as we have more than 100+ priority users. My ultimate goal will be placing the file in the webserver or a shared folder in the network. That is our option C...