About Pakorn Homhual

Pakorn Homhual · 09-09-2013

Hi All,I want to upgrade CME 8.0 to CME 9.1 for use CP 3905.I have question CME 8.0 upgrade to CME 9.1. I can't add dn phone type 3905. Cisco Unified CME 9.1 Supported Firmwarehttp://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/c...

Pakorn Homhual · 02-04-2014

Hi Jorge,I upload the files to flash. and conft tftp-path flash. I see problem error with sipphone. sh_voice_rege_globalsh_flashsh_regie_staticThank YouPakorn

Pakorn Homhual · 09-09-2013

Hi Jorge,http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f33eb.shtmlVoice Register Global Parameters Configurationvoice register global mode cme !--- Set Cisco IOS SIP registrar ...

Pakorn Homhual · 09-09-2013

Good luck!controller E1 0/0/0 framing NO-CRC4 pri-group timeslots 1-31 service mgcpinterface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice no cdp enable!voice-port 0/0/0:15!dial-peer voice 1 ...

Member Since	‎09-09-2013 07:10 PM
Date Last Visited	‎04-29-2020 06:42 PM
Posts	4

User Statistics

User Activity

I have question CME 8.0 upgrade to CME 9.1

I have question CME 8.0 upgrade to CME 9.1

I have question CME 8.0 upgrade to CME 9.1

2911 router cme