About Martin Hruby

Martin Hruby · 03-22-2017

Hello all We are looking install a new data center core switch based on the Nexus 7700 platform, probably the 7702 or 7706. We do not require many features, just the classic OSPF, VRF-Lite, vPC, 4x VDC... Now I know in the past there were quite big ...

Martin Hruby · 03-22-2017

Hello all We are looking install a new data center core switch based on the Nexus 7700 platform, probably the 7702 or 7706. We do not require many features, just the classic OSPF, VRF-Lite, vPC, 4x VDC... Now I know in the past there were quite big ...

Martin Hruby · 05-12-2016

Dear colleagues I'm ordering a bunch of ASR 1001-X routers which now have two 10G ports. I plan to connect the ASR to the existing 10G infrastructure by using Twinax cables (e.g. SFP-H10GB-CU3M). I was not able to find these under the list of support...

Martin Hruby · 12-01-2015

Dear community We are in the process of migrating from the old Cisco VPN Client 5 to Cisco AnyConnect. I have a couple of ASA-5510 running 9.1(1) code with a Base license, and in current setup all remote users log into the VPN using standard IKE/IPSe...

Martin Hruby · 01-20-2019

Congratulations @Peter Paluch ! It's a well deserved honour for all your expert advice over the years my friend! Best regards, Martin Hruby

Martin Hruby · 10-16-2016

Hi Mike Thanks a lot for the info! It's a shame that they decided to only start supporting twinax now, as I've had to deliver most of my ASRs with fiber optic cabling. Anyway I believe this was the right thing to do. Best regards,Martin

Martin Hruby · 12-08-2015

Thanks Marvin That's very helpful. Best regards,Martin

Martin Hruby · 11-09-2015

Hello No unfortunately you cannot run IOS-XR on a Catalyst switch, because it's platform dependent and only runs on carrier-grade CRS series, 12000 series, and ASR9000 series routers (or in a virtual environment like VIRL). Best regards,Martin

Martin Hruby · 11-08-2015

Hello I believe the SFTP transfer option is only available on the NX-OS and IOS-XR (see attached screenshot from NX-OS 7). In most cases it's best to use SCP which should be supported on most operating systems (including IOS and IOS-XE. Please check ...

Member Since	‎09-06-2013 02:43 AM
Date Last Visited	‎01-23-2019 12:05 AM
Posts	141
Total Helpful Votes Received	111

User Statistics

User Activity

Difference between F3 and M3 modules on the Nexus 7700

Difference between F3 and M3 modules on the Nexus 7700

Does ASR 1001-X support Twinax cables ?

Migrating from VPN Client 5 to AnyConnect

Re: Congratulations Peter Paluch: Our Newest Hall of Fame Member

Hi Mike

Thanks Marvin

Hello

Hello