About Milos_Jovanovic

Milos_Jovanovic · 12-04-2018

Hi, We are in process of migration ACS v5.8 to ISE v2.4 for a large international customer. My customer has a fully distributed deployment, operating on 3 regions/continents (EMEA, APAC, AM). ISE is used for 802.1x and VPN authentication, with AD int...

Milos_Jovanovic · 09-12-2013

Hi all,If i have 1M WAN link, what would be the value for traffic shaping: 1024000 or less? Bellow is an example of configuration on one of the routers in my company, and shapping value is set at 768000 with explanation that it always must be less be...

Milos_Jovanovic · 10-06-2023

Hi @Mandeep singh5, You can do this from CLI, by using certconfig command, and then follow the instructions. Kind regards, Milos

Milos_Jovanovic · 10-05-2023

Because SSO is in use, with multiple communication flows, including Azure sending assertion back to ASA, certificate on the public side must be signed by public/trusted CA. If Internal PKI is used, errors like these happens, regardless of ASA and cli...

Milos_Jovanovic · 10-04-2023

Hi @gaigl, All of this is supported on Secure Client same way as it is supported on AnyConnect. You can see guidelines here. However, I do believe they are exactly the same as for AC v4.10. Just make sure you go with latest release, as it fixes most ...

Milos_Jovanovic · 10-04-2023

Hi @Cisco3105, Could you please share relevant configuration from both ASA and switch? Kind regards, Milos

Milos_Jovanovic · 10-04-2023

Hi @00u18jg7x27DHjRMh5d7, This probably means it was provisioned at some point via FlexConfig, and, instead of cleaning it properly, someone just removed it from FlexConfig. Create new FlexConfig Object and configure "no sysopt noproxyarp Vlan300" op...

Member Since	‎07-16-2013 05:39 AM
Date Last Visited	‎04-17-2024 12:04 AM
Posts	624
Total Helpful Votes Received	1220

User Statistics

User Activity

ISE 2.4 multi-domain forest - design recommendation

Traffic shapping example and explanation

Re: Cisco WSA GUI Certificate Setup

Re: anyconnect+SAML - failed due to problem verifying server certific

Re: Migrating from Anyconnect to Secure Client

Re: No traffic between connected interface on Cisco 3105

Re: Continued failed deployment on FMC