Hello, I am running BGP on a Cisco 1841 router, I want to collect real time IP logs(source IP, Port, Destination IP Port) on a server, have configured logging but it does not collect IP logs. Can this be done through Netflow. Please Advice. RegardsSa...

Hello,   We are having multiple point to point and point to multipoint links, the problem we are facing is the lan of ubnt devices  disconnects after 15 to 20 mins. We are using Cisco SG350-28 Switches to connect the lan end. When the lan port for ub...

Hello All, We are having 2 ISP, have configured BGP for both the links on the same router, created vlans. We want traffic from selected vlans to go through ISP 1 and the rest all vlans to ISP 2, vlan 703 and vlan 801 to go through ISP 1 and rest all...

We need to configure BGP with 2 ISP on Single Router, with load balancing and failover. The current configuration is providing load balancing but if ISP1 link goes down, then browsing stops but if ISP2 goes down then we are able to browse. We have ad...

Hello All,I have a Cisco 3560 V2 Switch connected to Cisco 2811 router, all the bandwidth capping, IP assignments has been done on router and the corresponding vlans created on switch.I have configured 2 ports for a customer (vlan 301 and vlan 302 wi...