About Majed Zouhairy

Majed Zouhairy · 07-06-2021

i have static and redistributed routes enabled for advertising in eigrp, on routers you have to actually tag a static route and enable redistribution for the static route to be advertised, but no such thing in asa...so what can be done to filter one ...

Majed Zouhairy · 07-18-2019

Peace, i got a pak that i need to add to the prime license manager to increase ip phone number, when i click on licenses fulfillment, fulfillment licenses from pak, ii enter the pack, then i get asked for my cisco id, i enter the user name and passwo...

Majed Zouhairy · 07-15-2019

Peace, i have a hunt group configured to longest idle, and it forwards call on busy, unregistered or no answer calls on our main number to a secondary number (queuing is not enabled). if the secondary line is busy, the caller doesn't get a busy tone ...

Majed Zouhairy · 01-23-2019

Peace, I've trying to replace an old asa with a new one, i configured the new asa manually from scratch, but whenever i connect it, eigrp neighbors form, routes are in the topology table, but not in the routing table like in the old asa.the outside i...

Majed Zouhairy · 12-20-2018

Dec 21 09:21:03 002442: Dec 21 09:21:02.499: %IOSXE-3-PLATFORM: SIP2: cpp_cp: QFP:0.0 Thread:000 TS:00000170260043696482 %IPSEC-3-HMAC_ERROR: IPSec SA receives HMAC error, DP Handle 23, src_addr 70.237.64.93, dest_addr 96.58.187.88, SPI 0xc3036416sh...

Majed Zouhairy · 07-07-2021

hmm, currently i have:access-list ALLOWED deny 10.10.10.0/24access-list ALLOWED permit 10.10.0.0/16 route-map SELECTED, permit, sequence 10Match clauses:ip address (access-lists): ALLOWEDSet clauses: i configured the prefix list, now if i apply it in...

Majed Zouhairy · 05-26-2020

the problem was that dhcp was not allowed in the router access list:permit udp any host 255.255.255.255 eq 67 68needs to be added and what also helps is defining the domain in the dhcp pool

Majed Zouhairy · 03-11-2020

if you have static entries, then that it is was is causing the error solution:conf tno serv dhcp add the exclusion, then activate again: serv dhcp

Majed Zouhairy · 09-19-2019

and thank you for your feedback

Majed Zouhairy · 07-19-2019

you are the man! i checked the publisher's administration and cisco.com was pinging so i stupidly assumed the plm also has dns settings, i checked and it didn't, i also read from a thread that it may be that the cisco database is down. so i set the d...

Member Since	‎09-20-2013 10:21 AM
Date Last Visited	‎07-09-2021 02:29 AM
Posts	89
Total Helpful Votes Received	10

User Statistics

User Activity

how to filter static route from eigrp updates on asa

problems with cucm plm license activation

how to produce a busy signal instead of call waiting in hunt group?

asa not receiving or sending eigrp routes

Router isr 4351 error messages in ipsec tunnel

Re: how to filter static route from eigrp updates on asa

Re: Peace, at this point it does

Re: Problem with DHCP

Re: Problem with ssh and old switch

Re: problems with cucm plm license activation