About Nuno Magalhaes

Nuno Magalhaes · 10-13-2015

Hi all,I need to have in my application a device with 100 lines (+/-), now I'm using a third-party SIP device (advanced) but I only can assign 8 lines to this device.To achieve 100 lines I need to use 13 third-party SIP device (advanced), but I can'...

Nuno Magalhaes · 05-14-2015

Hi, I use winrtp to make the transmission and reception of rtp packets in my application that uses ctiports or sip devices and until Windows 7 it works fine, but in windows 8 doesn't work, I think the problem is because some dll's is missing.I've sea...

Nuno Magalhaes · 05-04-2015

Hi,I have 2 CUCM a production one (10.0.1) with DHCP enabled and a lab one (10.5.2) with DHCP disable, when I change TFTP server on phone from production to lab, the http configuration still points to production CUCM. All urls are correct in enterpri...

Nuno Magalhaes · 05-19-2014

Hi,I have this scenario:2 SCCP phones (A and C) and a Third-party SIP device (B)A calls B and B transfers to C, but when I attempt to transfer I receive the error "destination not found" on device (3cxPhone) and error 491: Request Pending, but if I m...

Nuno Magalhaes · 05-08-2014

I have this scenario:2 phones (A and B) from the same user with same DN in both phonesWhen receive a call, both ring and answer in phone A and hold call on A.Until CUCM 7.1.5 after receive CallCtlTermConnHeldEv for phone A I receive TermConnActiveEv...

Nuno Magalhaes · 10-13-2015

It's simple, I have a form with squares, each square represents a line, and only make call for meetme previously configured on application settings, and depending of call state, they have different colors and informations.I want only one device to su...

Nuno Magalhaes · 10-13-2015

I think that 100 lines doesn't make sense, but the client want to see all lines at once, this lines connects to meet me conferences and them are connected to clients outside. But now I have a doubt, it's possible 100 meetme conferences at same time?

Nuno Magalhaes · 05-14-2015

Winrtp was from Vovida Networks and purchased by Cisco some years ago, but I don't know if Cisco had developed more this component.

Nuno Magalhaes · 05-05-2015

They are on 9.3.1 version of firmware but they aren't update for newer versions, I suppose that this two problems are related.

Nuno Magalhaes · 10-21-2014

Solved!The problem was in privacy of phones, have to be turned off.

Member Since	‎09-30-2013 07:12 AM
Date Last Visited	‎09-21-2018 02:50 AM
Posts	17
Total Helpful Votes Received	1

User Statistics

User Activity

More than 8 lines in sip device

WINRTP in Windows 8

HTTP configuration doesn't change

Sip transfer destination not found

TermConnActiveEv doesn´t fire when hold call

It's simple, I have a form

I think that 100 lines doesn

Winrtp was from Vovida

They are on 9.3.1 version of

Re: TermConnActiveEv doesn´t fire when hold call