About devereauxj

devereauxj · 05-12-2014

Hi All,I have a Cisco ASA 5510 and would like to setup a NAT rule for one server but only for traffic that matches a destination with a specific IP and Port. Is this possible? The reason I ask is because I have one application that requires a connect...

devereauxj · 10-09-2013

Hi There,I am looking to setup a Cisco ASA 5510 with 2 outside networks and 2 inside networks. I would like it setup so that Inside1 will only use the Outside1 connection and Inside2 will only use the Outside2 connection. There will be absolutely no ...

devereauxj · 05-19-2014

This has appeared to resolve our issue. Thank you very much!

devereauxj · 05-14-2014

Thank you! We are running 8.4.Basically what I am trying to achieve is this:Internal Server (192.168.1.22) creates a session with external server (111.222.111.222) on ports TCP 333 and TCP 444. To access the external server a VPN is established, howe...

devereauxj · 10-10-2013

Ok, yes you guys are right. I didn't really think about the "Destination". Both Inside networks will be attempting to access the same Destinations and therefore will probably end up going out through the one Outside interface which I cannot have.So i...

Member Since	‎10-09-2013 08:07 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	5

User Statistics

User Activity

Outbound NAT for one Port Only

ASA 5510 - Multiple Networks

This has appeared to resolve

Thank you! We are running 8.4

ASA 5510 - Multiple Networks