About gleung001

gleung001 · 10-21-2013

I'm not a network expert but I am attempting to finish up a project started by someone else which is a setting up a guest wireless network. I'm having an issue where the machine connects to the SSID but doesn't get an ip address from the DHCP server ...

gleung001 · 10-22-2013

John, do I need set the ip helper on switch and on WLC interfaces section as well? Or does setting it on WLC suffice? Also to verify, the ip helper is 10.0.1.254 or 192.168.90.254?

gleung001 · 10-22-2013

gotcha, going to leave the office soon but will try this out tomorrow when I get in..thanks for your help john.

gleung001 · 10-22-2013

Hey john, do you mean configure vlan200 on a port on switch and plug laptop to it to see if it pulls an IP? Interface 1 (inside) on Firewall connects to 1/0/1 of switch. Interface 3 (trunk?) of Firewall connects to 1/0/2 of switch. Not sure if it mak...

gleung001 · 10-22-2013

Sorry John, I'm not familiar with the gi1/0/1.200. I looked through our switch config and I don't see anything similiar to that. This is what's on the interfaces section on ASA.

gleung001 · 10-22-2013

John, this is for the firewall..INTERFACE 1 ON CISCO ASAinterface GigabitEthernet1/0/1 description ASA_LAN switchport access vlan 10 switchport mode accessINTERFACE 3 ON CISCO ASAinterface GigabitEthernet1/0/2 description ASA_TRUNK switchport trunk e...

Member Since	‎10-21-2013 11:41 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	11

User Statistics

User Activity

Guest Wireless Access

Re: Guest Wireless Access

Re: Guest Wireless Access

Re: Guest Wireless Access

Re: Guest Wireless Access

Re: Guest Wireless Access