About MaxvatarT

MaxvatarT · 09-23-2013

Hello all,I'd like to share with others one tricky topic on product RV120W (btw very fine pce of hw). When I did initial setup, I went trough the documentation precisely. I set up 2 VLAN and 2 WiFi (one as main and other for guests). When I got to wi...

MaxvatarT · 08-04-2014

Hello Jean Marc,the setup is as you described in previouse post:1) set LAN-VLAN-settings up with disabled "Inter VLAN Routing" 2) set two WIFI hotspots, one for each VLAN. Set "Wireless isolation" for guest hotspotHope it helps. Good luck !P.S. Sorry...

MaxvatarT · 06-16-2014

Hello Jean-Marco,the support did actually nothing. The check box really switches only wireless client isolation in terms, that clients within one wireless network cannot see/ping each other.I did my setup as follows:1) LAN in 192.168.1.x subnet2) fir...

MaxvatarT · 10-25-2013

Hello all,the URL is not valid anymore. Has anybody downloaded the article and want to share it ?ThanksMaX

MaxvatarT · 10-04-2013

Hi all,I've just finished the webex session with CISCO support. The result is:1) isolation of WiFi clients works fine, as it should work,2) the description in administration guide is completely wrong and misleading ... and will be corrected in near f...

MaxvatarT · 10-03-2013

Hi Tom,well first of all, I don't speak about wired computer. I mentioned it only in the beginning for purpose, that DHCP and router itself work correctly.OK, I can accept, that the term "Wireless Isolation within SSID" can be understand as you and D...

Member Since	‎09-23-2013 02:46 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	11

User Statistics

User Activity

RV120W and "Wireless Isolation within SSID"

Hello Jean Marc,the setup is

Hello Jean-Marco,the support

RV120W VPN Client Setup (Shrew/Greenbow)

Re: RV120W and "Wireless Isolation within SSID"

Re: RV120W and "Wireless Isolation within SSID"