I would like to know if anyone knows how to politely approach the author of a Cisco backed publication about an erroneous understanding of a topic.
I will give two examples; not to try to disrespect the authors, but to help anyone that may be getti...
Hello Jen,
I am unaware of any feature that would detect and autocorrect the mismatch in any modern IOS versions. I also think that the devices would have to cycle through all the possibilities until they can understand what is coming across the lin...
I cannot say that there will always be a clock signal on a serial line, there may not be. Additionally, to help with phase shift, there usually is a serial clock transmit external (SCTE) signal as well (don't worry about this one). If there are no ca...
Hello Jen,
That first statement can help add to the original confusion. I should have stated, "This command, on the DCE side, tells the routers on the link how many samples they should take per seconds and how often they should send on that same lin...
Thank you Philip. I can't believe I didn't try that first. I will give it a try. Hopefully Pearson, the publisher in this case will be as responsive as Cisco Press. This brings me back memories of corrections I sent on couple occasions to a test prep...
This command tells the router how many samples it should take per seconds from the recieving interface. The the Telco provides the clocking to your router to ensure that there is no significant phase shift between the transmitted signal and the recei...
.jpg "Hall of Fame Master"){kind=icon}
