About sharonccie

sharonccie · 08-06-2014

I need one help!!Request you to give a hind about Opac-LSA's in ospf!what is the use?. if possible give some examples.I have gone though the below link. but not clear, please help me on thathttp://tools.ietf.org/html/rfc5250looking forwards to hear...

sharonccie · 05-15-2014

I am stimulating MPLS In IPV6, Here I am getting some error like this... Please help me on this.!*May 15 13:18:10.046: %TDP-4-IDENT: cannot set default TDP ident====================================================R1#show mpls ldp neighbor detailTDP ...

sharonccie · 04-28-2014

Am planning to stimulate one lab, Here I couldn't able to enable IPV6 MPLS L3 Vpn. Request you to help me to get the proper IOS which support IPV6 MPLS L3 in GNS3.

sharonccie · 09-16-2014

Hi,As of my understanding, u are still keeping the default management ip in your switch. wn u are connecting new switch, that also have the same default management Ip, that get conflict each other. Better, change ur switch default Management IP, or ...

sharonccie · 08-06-2014

I ma sorry to tell you that No it is not possible!. A Cisco 3750 switch can be stacked with any other model of Cisco 3750 switches. Catalyst 3750 switches that run Cisco IOS® Release 12.2(25)SEB are compatible with Cisco EtherSwitch service modules t...

sharonccie · 07-17-2014

Hi TVU, If you are planning building based VLAN, u should have to specify one routing interface for each VLAN communication. for that either you can use one router or L3 switch. All L2 switch connect each other via trunk and another trunk can connec...

sharonccie · 07-02-2014

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/936-cisco-router-vpn-dynamic-endpoint.html

sharonccie · 05-15-2014

Hi Giuseppe,Thanks you So Much for your reply!!I would like to create its on IPV6 Including Backbone, Any hope?? Regards,Sharon PK

Member Since	‎10-29-2013 06:35 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	25
Total Helpful Votes Received	9

User Statistics

User Activity

Opac-LSA's in ospf

*May 15 13:18:10.046: %TDP-4-IDENT: cannot set default TDP ident

IPV6-MPLS-L3 in GNS3

Hi,As of my understanding, u

I ma sorry to tell you that

Hi TVU, If you are planning

http://www.firewall.cx/cisco

Hi Giuseppe,Thanks you So